Cutting Fluids

Description:

BLUE CUT 1 is a multifunctional, biostable, semi synthetic cutting fluid designed to produce optimum machining performance whilst exhibiting excellent sump life and resistance to bacterial growth. It is blended with a high level of biocides, emulsifiers and foam suppressants and is free from sodium nitrate and phenols. BLUE CUT 1 is a multipurpose metal working fluid and therefore reduces the number of cutting oils to be stocked.

Applications:

DEGEASING FLUID TYPE 2 is to be applied preferably neat, with a spray or brush, and allowed to soak into the grime or dirt, then agitated and washed off with a jet of water.

Product Features:

  • Biostable formulation will not smell and offers extended sump life
  • Excellent tool life and surface finish
  • Good anti-corrosion properties
  • Superior cooling and wetting ability
  • High degree of operator acceptability

Description:

BLUE DRAW 77 is a high performance, water soluble paste designed for metal drawing and pressing operations. It is fortified with selected extreme pressure additives and is suitable for a broad range of ferrous and non-ferrous metals. It can be used neat or diluted to suit the application.

Applications:

Recommended for a wide variety of pressing, punching, stamping and drawing applications including the most severe metal forming operations. Can be used for ferrous and nonferrous metals. Suitable for deep drawing of stainless steel. BLUE DRAW 77 can be used neat or diluted depending on the application.

Product Features:

  • Excellent lubricating properties prevent adhesion between work piece and die to enhance surface quality.
  • Prolongs service life of tooling.
  • Reduces waste ratio and increases productivity.
  • Work piece is readily ejected from mould.
  • Protects against rust.
  • Low odour and easy to clean work pieces.

Description:

High oil containing nitrite free phenolic free conventional opaque soluble oil. Containing emulsifiers, corrosion inhibitors, foam suppressants and other functional additives to impart the necessary performance for this category of product. In various metal cutting operations a conventional general purpose soluble oil is requested. This type of product is widely accepted due to its cooling and lubricating properties.

In comparison with more modern fluids, BLUE SOL – AL may be considered lacking in terms of resistance to microbial spoilage and therefore coolant life. With this in mind BLUE SOL – AL would normally be suggested for use in applications where high losses are encountered or soluble oil costs are the major factor. As with all water based fluids, good housekeeping and system maintenance are important to ensure the satisfactory working life of the product.

Applications:

This product can be used an all ferrous metals, including copper, brass and aluminium alloys. ( Method of Use  :  5% – 8% Maximum ) In all general metal removal operations were cooling and machine tool lubrication is required.

Product Features:

  • Corrosion protection of workpieces.
  • Good cooling and lubrication.
  • Stable opaque emulsions tolerant to hard waters.
  • Shows good tramp oil separation.
  • Low foaming potential.
  • Good filterability.
  • Low odour.
  • Cost effective at working dilution’s.

Description:

High oil, conventional milky soluble oil. Containing emulsifiers, corrosion inhibitors, foam suppressants and other functional additives to impart the necessary performance for this category of product. In various metal cutting operations a conventional general purpose soluble oil is requested. This type of product is widely accepted due to its cooling and lubricating properties.

In comparison with more modern fluids, BLUE SOL -MP may be considered lacking in terms of resistance to microbial spoilage and therefore coolant life. With this in mind BLUE SOL – MP would normally be suggested for use in applications where high losses are encountered or soluble oil costs are the major factor. BLUE SOL – MP is nitrite, phenol and cresol free. As with all water based fluids, good housekeeping and system maintenance are important to ensure the satisfactory working life of the product.

Applications:

This product can be used an all ferrous metals, including copper, brass and aluminium alloys.

Method of Use : 10:1 – 40:1 Maximum dilution

In all general metal removal operations were cooling and machine tool lubrication is required.

Product Features:

  • Corrosion protection of workpieces.
  • Good cooling and lubrication.
  • Stable opaque emulsions tolerant to hard water.
  • Shows good tramp oil separation.
  • Low foaming potential.
  • Good filterability.
  • Low odour.
  • Cost effective at working dilution’s.

Description:

BLUE TAP MP is a medium viscosity, multipurpose, neat cutting oil fortified with inactive sulphur, chlorinated paraffin and fatty oil additives to impart ease of machinability, extended tool life and improved surface finish. Designed for a wide variety of machining operations and can be used on all ferrous metals.

Applications:

Recommended for a broad range of metal removing operations including, but not limited to, general lathe work, milling, drilling and honing. Particularly suitable for tapping and pipe threading. Can be used on all ferrous metals. Recommended for applications where tool life and surface finish are important. Staining may be experienced when used on non-ferrous metals.  In situations where work pieces are reworked or undergo finishing operations this may not be a consideration. Apply neat by flood application.

Product Features:

  • Higher speeds and feeds may be used.
  • Extended tool life.
  • Excellent surface finish
  • Versatile in many applications
  • Low misting and smoking potential
  • Good filterability
  • Low Odour